Industro-Lite F300 Milling Machine

Details

Industro-Lite horizontal mill Model: F300 Serial: 132 Motor: 120V ~3/4hp Spindle: Morse Taper #3 Weight: Approximately 500lb Table: 6" x 22" Travel: X=14"(side to side), Y =12" (up/down), Z =4.5"(in/out) Speeds: 12 (42, 78, 110, 152, 200, 370rpm back gear 170, 310, 450, show contact info rpm direct drive) These aren't very common, probably only a few hundred were ever made which is kind of a pity because they were well thought out machines. I gave this one a pretty complete going through when I picked it up ~14 years ago and devoted a webpage to it: https://www.stuffdoneright.net/projects/shop/machines/industrolite/ There is also another webpage devoted to these machines: http://www.lathes.co.uk/industro-lite/ I think I said in there I would always find a place for it in my shop but things change and I don't really use it enough to justify the space for this particular machine anymore so I need to let it go. I never got around to making an arbor or arbor support for the machine but I did collect a number of cutters for it thinking I would. I'll include all of those as well as some t-nuts and a couple of collets. Just the odd sizes of collets though (1/8, 3/16, 5/16, 7/16) as I once had a lathe (the Logan on my website actually) with the same Morse taper #3 in the headstock and gave the complete set of collets to the person who bought that. I'll also include a drill chuck with MT#2 arbor and a MT#2 to MT#3 adapter.